Journal Cover
Volume 20 No 12 (2022)
Download PDF
Parametric Optimization
Prof. Naimesh Kadiya
Abstract
This research used a stir-casting technique to create a Metal Matrix Composite (MMC) made of Al7075 and Al2O3
under Parametric Optimization. Wire Electrical Discharge Machining (WEDM), the outcome responses in term of
Surface Roughness (Ra) and Material Removal Rate (MRR) were examined as a function of five parameters
areCurrent, Pulse ON, Voltage, Pulse OFF, and Bed Speed. Taguchi's L18 orthogonal array has been utilized for
experimentation. Analysis of the Signal-to-Noise Ratio (S/N) was used to evaluate the responses from the output,
and Analysis of Variance (ANOVA) was used to find the parameters with the most significant effect. The
experimental results were used to identify the optimal values of parameters that optimize to reduce the Surface
Roughness (Ra) and Material Removal Rate (MRR)
Keywords
MRR, WEDM, MMC, Ra, Minitab 17 software, Taguchi orthogonal array
Copyright
Copyright © Neuroquantology
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Articles published in the Neuroquantology are available under Creative Commons Attribution Non-Commercial No Derivatives Licence (CC BY-NC-ND 4.0). Authors retain copyright in their work and grant IJECSE right of first publication under CC BY-NC-ND 4.0. Users have the right to read, download, copy, distribute, print, search, or link to the full texts of articles in this journal, and to use them for any other lawful purpose.